The following Windows® PC-based Fugawi software products are supplied with Fugawi PDA Edition software for both Pocket PC and Palm:

• Fugawi Global Navigator
• Fugawi Marine ENC Ver. 4
• Fugawi Map of America
• Fugawi Fishing Lakes USA
• Fugawi UK Digital Maps Ver. 4

Fugawi PDA Edition for Pocket PC has been designed to work on devices using the following operating systems:

• Microsoft® Mobile 2003
• Windows® Mobile 5 Pocket PC
• Windows® Mobile 5 Pocket PC, Phone Edition

Fugawi PDA Edition for Palm has been designed to work on devices using the following operating systems:

• Palm OS Version 5.x
• Palm OS Version 3.5x and Version 4.x are supported by a previous version of Fugawi PDA Edition for Palm, supplied on the Fugawi Install CD (See Note 2 below).

Note that while Fugawi PDA Edition has been designed to operate correctly on any device with the above operating systems, there are many variations on device implementations. Therefore, we cannot guarantee that Fugawi PDA Edition will operate correctly on every hardware platform.

To ensure that Fugawi PDA edition will work correctly on your PDA device, we advise that you download and test the free Fugawi 10-day demo version in advance of making your software purchase.

The following PDA devices have been tested with Fugawi PDA Edition:

PDA Device Name	Compatible with Fugawi PDA Edition?	Notes
Pocket PC Devices
Acer n35		Built-in GPS on com-8, 57600 baud
Asus MyPal 636		Requires disabling of automatic management of com ports. In Fugawi PDA, Set GPS|Preferences to com-5. Then restart device for changes to take effect.
Dell Axim All Models
E-TEN Glowfiish X500		Internal GPS - set the com-port to com-4 and baud rate at 57600
Fujitsu-Siemens Pocket Loox		In the Pocket Loox, from the Access tab, go to GPS settings and deselect "Manage GPS Automatically". Then, under the Programs tab, change the port setting to COM 8. Then in the Hardware tab, change the port to COM 1, Baud 9600.
Fujitsu-Siemens Pocket Loox N 500 and N 560		In the Pocket Loox N 560, from the Access tab, go to GPS settings and select "Manage GPS Automatically". In the Hardware tab, set the port to COM 8, 9600 Baud. In the Programs tab, set the port to COM 9. In Fugawi (on the Pocket Loox), set the GPS|Prefs to COM 9, 9600 Baud.
Garmin iQue M5		Built-in GPS on com-2, 4800 baud
Garmin iQue M4
HP iPAQ All Models		iPAQ 6515 – built-in GPS on com-7, 4800 baud iPAQ hw6940 – built-in GPS on com-7, 57600 baud iPAQ hw6955 – built-in GPS on com-7, 57600 baud iPAQ hx2790 – when using with the Fortuna GPS-PocketXtrack Compact Flash GPS – The CompactFlash GPS uses COM 6 – choose COM 6 in Fugawi but NONE in Windows Mobile 5 under Settings/GPS/GPS Program Port and COM 4, 4800 under GPS Hardware Port.
HTC P3300
Mitac Mio 168		Built-in GPS on com-2, 4800 baud
Mitac Mio A201
Mitac Mio A701		Built-in GPS on com-2, 57600 baud
Navman PiN		Built-in GPS on com-2, 4800 baud
Navman PiN 570		Built-in GPS on com-8, 9600 baud
XDAII		WM2003 – To add Bluetooth device, under Settings, choose Connections, and under My Work Network specify ‘Add new modem connection’. Choose Bluetooth and then accept the com-port that is offered (Com 5).
Palm Devices
Garmin iQue 3600		Built-in GPS on com-1, 4800 baud
Handspring Visor
Palm LifeDrive		For use with Bluetooth GPS: Palm infrared keyboard is turned on by default, so that the keyboard works whenever it is used. Manually turn off the Palm infrared keyboard before using a Bluetooth GPS.
Palm 705
Palm M505
Palm M515
Palm Treo 600
Palm Treo 650
Palm Tungsten C
Palm Tungsten E
Palm Tungsten T
Palm Tungsten T2
Palm Tungsten T3
Palm Tungsten T5		On the Palm side, the transfer baud rate needs to be set at 9,600 bps and the flow control needs to be "on," as opposed to "off" or "automatic."  On the desktop side, under the HotSync settings for Com 1, the bps needs to match the Palm at 9,600 bps
Palm TX
Palm VX
Palm Zire 72
Sony Clie

Notes:

1. This list is not exhaustive – if your device is not listed, it may still work with Fugawi PDA Edition, however the device has not been tested by Northport Systems Inc.
2. The latest Fugawi PDA Edition for Palm only works with Palm OS Version 5.x. Those using a device with Palm OS Version 3.5x or Version 4.x. will receive a fatal error when opening Fugawi PDA Edition. If your Palm device is running Palm OS Version 3.5x or Version 4.x you will need to manually install the previous application file (FugPalm.prc Version 1.02.08) supplied in the Utilities folder on the Fugawi Setup CD. Development of FugPalm.prc Version 1.02.08 has ceased. No further Fugawi feature enhancements will be added for Palm Version 3.5x or 4.x devices.)
3. If you have tested a PDA device that is not listed above, please email support@fugawi.com with details.